在升降貨梯http://www.xjypl.com/工作的時候會遇到油管爆裂的問題，不僅會影響到設備的安全性，更會阻礙工作的進行。下面濟南天銳升降機械的有關專家就給大家詳細介紹一下升降貨梯油管爆裂怎么處理？
1、首先要先弄清楚升降貨梯油管爆裂的原因，一般都是由于油管承受的壓力過大，或者相關的接口沒有擰死引起的。如果發現油管有爆裂的現象，只要關閉控制閥并更換新的油管。
First you have to figure out the cause of the burst pipe cargo lifter, usually due to the tubing pressure is too large, or the associated interface is not screwed caused death. If you find that there is a burst pipe phenomenon, just close the control valve and replace with new tubing.
2、在設計或者生產升降貨梯http://www.xjypl.com/的時候嚴格計算承載重力多需要的動力單元的大小，防止過大的動力單元工作時候將油管爆裂。在接口方面，我們要盡可能擰死所有的接口，嚴禁漏油，在油管的選擇上應該使用高質量的油管。
In the design or production Huoti strict when calculating the size of the force of gravity carries much needed element to prevent excessive power unit when the work will pipe burst. In the interface, we want to wring as much as possible all interfaces dead prohibited oil spills, in the choice of the tubing should use high-quality tubing.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
